If remote ID issues result in an "Open Drone ID" error, follow the same steps as above in HA Ground Control → Application Settings → General → Miscellaneous → verify "Enable Remote ID" is checked.
In the Remote ID sidebar tab, verify Basic ID is set to 18136(vehicle model)(VIN). Disregard the NMEA External GPS Device and Baudrate dropdowns as they are not relevant to the C-Navigator.
If issues persist with a Garmin device, refer to the troubleshooting document: Garmin with Navigator5.pdf.
If unresolved, please submit a ticket.
Comments
0 comments
Article is closed for comments.